Desanto Centurion

[ASPHIAX]

Hello everyone,
I am new to this beautifull forum and i have a question.
I am looking for a mesh or stl of the desanto centurion. I want to build a studio model of the centurion uppertorso so i can build a highend watercooled pc into it. I am currently working on a model of the ablative armour voyager (from endgame) with a length of 154 cm and 60 cm wide. It will feature lots of custom parts and for example the warp nacelles are the waterreservoirs lit up by led's. I know its a bit off topic (ie not 3D) but i hope you can help!
Many thanks in advance!
ASPHIAX

To see some of my work captured in my buildlog (in dutch only sorry)
http://gathering.tweakers.net/forum/list_messages/1444110/last

[gmd3d]

did you check out the gallery. there may be some images in there

[ASPHIAX]

Hi Taranis,
Thansk for your reply!
Yes I did check the galery. It has the same wax sculpture and artists impression images i found on the web. But unfortunately my skills lie in the creation of reallife models and pc's and not in 3D mastery. I have the utmost respect for you guys that make these 3D models as i know how difficult it can be to get right in the real world.
Maybe you can point me to someone who can create a STL or mesh from those images in the galery? I do have some budget so it wouldnt have to be a freebie.
Thanks!
ASPHIAX

[gmd3d]

well that is out side my skill....

I know of a few modellers that might tackle this but they work as professionals..

I will point them in this direction as let them see your intentions . but it will be up to them to get in touch with you... as they can be busy and in the past when I or other have point someone in their direction
it became a problem for there own work.

But I will point them here. and see what happens

[ASPHIAX]

I could not ask for more m8!
thanks!
Now i hope someone will respond.
best
ASPHIAX

[gmd3d]

Good enough :)

[Thunderstruck]

I am unsure of what exactly you are making. If this is a suit,costume or of that nature than here:

LINK (http://www.byyourcommand.net/cylonforum/viewforum.php?f=34)

Ahh, not what I thought you were asking

edited.

[ASPHIAX]

Well, this is the current state of the EURISKO project.
Its a foam model that will be covered with Epoxy/glass and airbrushed.
After all that work i will build a highend watercooled pc and servo assembly (for making the warp nacelles move upwards) into the model
http://i54.tinypic.com/fm89vq.jpg

My Next project will be the head and shoulder part of the desanto centurion, into which again i will build a high end watercooled pc and i am thinking of using collision detection hardware to make the led lights in the eyes fixate on the object in front of it.
http://i55.tinypic.com/2i8bs46.jpg

But i need a 3d model of the centurion to get the proper dimensions and calculate space available for the hardware.

Hope this makes it more clear ?

My apologies if this is off topic for this forum !

[gmd3d]

I don´t think its off topic .. rather on topic :)

good look with it and keep us informed :)

[ASPHIAX]

I don´t think its off topic .. rather on topic :)

good look with it and keep us informed :)

Thanks!
Sure, what i can do is put the build log on this forum also if that's ok.
It will also be on Tweakers.net and bit-tech.net.