Desanto Centurion

ASPHIAX · February 17th, 2011, 11:32 PM

Hello everyone,
I am new to this beautifull forum and i have a question.
I am looking for a mesh or stl of the desanto centurion. I want to build a studio model of the centurion uppertorso so i can build a highend watercooled pc into it. I am currently working on a model of the ablative armour voyager (from endgame) with a length of 154 cm and 60 cm wide. It will feature lots of custom parts and for example the warp nacelles are the waterreservoirs lit up by led's. I know its a bit off topic (ie not 3D) but i hope you can help!
Many thanks in advance!
ASPHIAX

To see some of my work captured in my buildlog (in dutch only sorry)
http://gathering.tweakers.net/forum/...s/1444110/last

gmd3d · February 18th, 2011, 04:00 AM

did you check out the gallery. there may be some images in there

ASPHIAX · February 18th, 2011, 04:51 AM

Hi Taranis,
Thansk for your reply!
Yes I did check the galery. It has the same wax sculpture and artists impression images i found on the web. But unfortunately my skills lie in the creation of reallife models and pc's and not in 3D mastery. I have the utmost respect for you guys that make these 3D models as i know how difficult it can be to get right in the real world.
Maybe you can point me to someone who can create a STL or mesh from those images in the galery? I do have some budget so it wouldnt have to be a freebie.
Thanks!
ASPHIAX

gmd3d · February 18th, 2011, 05:17 AM

well that is out side my skill....

I know of a few modellers that might tackle this but they work as professionals..

I will point them in this direction as let them see your intentions . but it will be up to them to get in touch with you... as they can be busy and in the past when I or other have point someone in their direction
it became a problem for there own work.

But I will point them here. and see what happens

ASPHIAX · February 18th, 2011, 05:25 AM

I could not ask for more m8!
thanks!
Now i hope someone will respond.
best
ASPHIAX

gmd3d · February 18th, 2011, 05:28 AM

Good enough

Thunderstruck · February 18th, 2011, 08:22 AM

I am unsure of what exactly you are making. If this is a suit,costume or of that nature than here:

LINK

Ahh, not what I thought you were asking

edited.

ASPHIAX · February 18th, 2011, 09:58 AM

Well, this is the current state of the EURISKO project.
Its a foam model that will be covered with Epoxy/glass and airbrushed.
After all that work i will build a highend watercooled pc and servo assembly (for making the warp nacelles move upwards) into the model

My Next project will be the head and shoulder part of the desanto centurion, into which again i will build a high end watercooled pc and i am thinking of using collision detection hardware to make the led lights in the eyes fixate on the object in front of it.

But i need a 3d model of the centurion to get the proper dimensions and calculate space available for the hardware.

Hope this makes it more clear ?

My apologies if this is off topic for this forum !

gmd3d · February 18th, 2011, 10:06 AM

I don´t think its off topic .. rather on topic

good look with it and keep us informed

ASPHIAX · February 18th, 2011, 10:17 AM

Quote:

Originally Posted by Taranis

I don´t think its off topic .. rather on topic

good look with it and keep us informed

Thanks!
Sure, what i can do is put the build log on this forum also if that's ok.
It will also be on Tweakers.net and bit-tech.net.