View Single Post
Old February 1st, 2011, 07:56 PM   #30
Harnessworks
Bad Email Address
 
Harnessworks's Avatar
 
Join Date: Jan 2011
Posts: 19

Default Re: Viper Jacket Pattern For Those Interested

Spread the joy you know And of course, the work...

Another thing I did on there was put reference measurements so you can size up the pattern from the photos. If you can't get on there and need that info let me know too. Easy to do.

Actually....(pulls out her tape measure and puts some reference measurements here too)

Back length, from highest point at shoulder to base 22 3/4 inches
Back width along adjust shoulders here line 9 3/4 inches

Shoulder cap length along center seam 11 inches

Large front piece along leading edge (where buckles go) 21 inches
Width along the adjust here line for this piece is 12 7/8 inches

Front shoulder small piece along bottom edge with cut out square 9 inches

Collar 19 inches long by 3 inches wide

Waist band 18 inches long by 6 inches wide

Right sleeve along longest edge with the "don't do" spot 19 1/2 inches

Left sleeve largest piece along the bottom (smallest) edge 14 3/4 inches

Hopefully this will help you blow this pattern up at home on your computer if you want too. Aim for those measurements to get your base pattern.

This pattern fits someone who has the following measurements:
18 inch shoulders, 44 inch bust, 40 inch waist

All seam allowances are 1/2 inch.

There we go.....
Harnessworks is offline   Reply With Quote