Colonial Viper MK-II Diorama

[Rhaven Blaack]

OK, I know and FULLY UNDERSTAND that this website is (for the most part) for the TOS BSG. However, I have something from the TNS BSG that I think all will like.

Recently, I made a diorama of a Viper MK-II (the scale is about 1:50) that shows all of the internal components and various mechanics working on it. Yes, everything is paper (and yes, you can download everything off the internet for free).
Here are the photos of the final diorama.

6069 6070 6071 6072 6073 6074 6075
The Viper can be found at http://uhu02.way-nifty.com/
Most of the different components (the laptops, the computer diagnostic system, the table and chair, the tool chests, the gas tank and fire extinguishers) can be found at http://www.epson.jp/sponsor/nakajima/craft/
The mule tractor can be found at Zealot in the RESOURCE Section.
The figurines can be found at http://tcfgaming.com/
(*NOTE* I did repaint them to look like the mechanics on BSG. THESE ARE NOT AVAILABLE AS THEY ARE IN THE DIORAMA!).

If you would like to see the build thread, you can see it here: The UHU02 Colonial Viper appreciation thread (http://www.zealot.com/threads/the-uhu02-colonial-viper-appreciation-thread.174905/) | Zealot

ENJOY!!!

[Senmut]

Excellent. In the stripped-down state, it is hard to tell from a TOS Viper. With a bit of tweaking, it could become one easily.
Question...has anyone ever done any CGI or diorama of Croad's fighter, from Proteus? Be nice to have a look into that era fighter.

[Amon Ra]

I'm surprised you got past the ridiculous password riddle to get any models from way-nifty.com.

I've been trying for a while, but I don't know what the heck I'm supposed to do or even what I'm supposed to be looking for, and if you ask for help of ANY kind of help at all people get all weird about it so I said screw it - I don't want a lousy paper model bad enough to put up with the attitude.

But cool diorama.

[Senmut]

Is there a Cylon version?

[Rhaven Blaack]

@ Senmut, Are you referring to this Viper (which is often referred to as the Sixth Millennium Viper)?

6076
There is another designer that is planning on making a paper model of this fighter (but it will be quite some time before he is able to get to it though).

Unfortunately, there is not a Cylon version (yet). I do not know if UHU02 has it is the queue of things to make.




@ Amon Ra, Yes it is true that UHU02's work is highly protected. This is something that he wanted. He has had problems with pirates and people claiming credit for his work. Not only that, but his models are some of the most sot after on the net.
Yes, it is a rule that one CAN NOT ask for (or distribute) the log-in and password information in open forum. Members caught doing such will be banned from the forum (especially if that member is passing out the information).
This information is very easy to find. All you have to do is go to the UHU02 Appreciation thread (http://www.zealot.com/threads/the-uhu02-appreciation-thread.168265/) and thoroughly read through it and you will find what it is that you are looking for (of course, you have to be a member of the forum as well).
I (for one) am terrible at finding these sort of things, but I was able to do it. So if I can do it, so can you. Yes, I was able to find this information BEFORE I was the site administrator.
You just have to read the thread and pay attention.

Not only that, but if you follow his website, you will see that he will leave the model that he is currently working on available for all to download for a certain amount of time before he locks it in the library.

I am sorry to hear that you think that paper models are lousy (what a shame). You are really missing out on a WONDERFUL side of model building that is VERY ENJOYABLE and GREATLY UNDER-RATED.
I have always found paper models far more CHALLENGING and ENJOYABLE to make than plastic models. Not only that, but there are a GREAT DEAL MORE paper models available than there are plastic. There are many paper models that you can not even find in plastic (or any other medium for that matter).
The really cool thing is that most of them are free.

[gmd3d]

Smallworld built a model of Croad's fighter and in the downloads area.. I have not seen it appear in any render yet, at least as far as I know

[Senmut]

@ Senmut, Are you referring to this Viper (which is often referred to as the Sixth Millennium Viper)?

6076


Yup. That be it. Looks cool.

[Amon Ra]

@ Senmut, Are you referring to this Viper (which is often referred to as the Sixth Millennium Viper)?

6076
There is another designer that is planning on making a paper model of this fighter (but it will be quite some time before he is able to get to it though).

Unfortunately, there is not a Cylon version (yet). I do not know if UHU02 has it is the queue of things to make.




@ Amon Ra, Yes it is true that UHU02's work is highly protected. This is something that he wanted. He has had problems with pirates and people claiming credit for his work. Not only that, but his models are some of the most sot after on the net.
Yes, it is a rule that one CAN NOT ask for (or distribute) the log-in and password information in open forum. Members caught doing such will be banned from the forum (especially if that member is passing out the information).
This information is very easy to find. All you have to do is go to the UHU02 Appreciation thread (http://www.zealot.com/threads/the-uhu02-appreciation-thread.168265/) and thoroughly read through it and you will find what it is that you are looking for (of course, you have to be a member of the forum as well).
I (for one) am terrible at finding these sort of things, but I was able to do it. So if I can do it, so can you. Yes, I was able to find this information BEFORE I was the site administrator.
You just have to read the thread and pay attention.

Not only that, but if you follow his website, you will see that he will leave the model that he is currently working on available for all to download for a certain amount of time before he locks it in the library.

I am sorry to hear that you think that paper models are lousy (what a shame). You are really missing out on a WONDERFUL side of model building that is VERY ENJOYABLE and GREATLY UNDER-RATED.
I have always found paper models far more CHALLENGING and ENJOYABLE to make than plastic models. Not only that, but there are a GREAT DEAL MORE paper models available than there are plastic. There are many paper models that you can not even find in plastic (or any other medium for that matter).
The really cool thing is that most of them are free.

I love paper models, but I don't like being given an attitude for asking for help because I didn't kow where to start. All I wanted to know was if I was supposed to looking for a picture, a posting, or both.

As for the zealot website, I did register there, but I probably won't be back since it was one of the mods who gave me the attitude in a snotty email which basically said everything I needed to know was on his site and to not ask for any more help and to reply if I understood, which I never did.

As far as I'm concerned the uhu dude can keep his models, plenty more to be built elsewhere. My advice to him though is this: if you're that worried about your models being stolen, then you should probably just keep them to yourself and not post them on the internet for all the world to see because eventually somebody, somewhere WILL steal them - it's human nature.

And it's not even him that was rude, it's all these other people that think their his personal mouthpieces or something. Apparently these people assume that we're all out to steal the models.

Sorry about the rant, but they are, in the end, just paper models.

[Rhaven Blaack]

Yup. That be it. Looks cool.

It does indeed look cool. There have been a few plastic models (that were scratch built) of this Viper, but (to my knowledge) there has never been a production model (plastic or paper for that matter) released to the public.

[Senmut]

In close-up, the fine print says "Scorpion", not Viper. A confusion of names, perhaps?

[Rhaven Blaack]

In close-up, the fine print says "Scorpion", not Viper. A confusion of names, perhaps?

Oddly enough, according to http://www.shipschematics.net, this fighter is (in fact) listed a the "Scorpion" instead of "Viper".
Look here: http://www.shipschematics.net/bsg/images/colonial/fighter_scorpion_mk1.jpg

I guess it is (indeed) a confusion in names; as most people (automatically) call most fighters from BSG "Vipers".

Regardless of what it is called, it is still a good looking plane (and one that I am eagerly looking forward to building out of paper). :thumbsup:

[Senmut]

Must have cannabalized alot of stuff to keep the last one going for all those yahrens.

[Rhaven Blaack]

Must have cannabalized alot of stuff to keep the last one going for all those yahrens.

I would have to agree with you on that one, but then again it is a simple enough fighter, that doing such would not be that much of a problem (for the most part).

[Senmut]

Well, Assault 9 says they have been brewing ambrosia for 700 yahrens, and it's been a long time since a Colonial freighter landed there. No new deliveries of anything. To keep even one ship flying after all that time, they must have been cannabalizing what was once a small squadron. I would imagine a machine shop, and some source of tylium. Even so, they were down to the last flyable ship by the time the Fleet got there.

[Rhaven Blaack]

In showing appreciation to (and thanking) uhu02 for for this wonderful model.
I was at a paper model expo this weekend (06/06 - 06/08 2014). I had entered this diorama.
I won the award for "Best in category" "Dioramas".
I would also like to thank; silveroxide for the service mule, Tirick for the figurines, Revell-Fan for one of the cabinets, and Japanese Epson paper crafts (http://www.epson.jp/sponsor/nakajima/craft/) for the pit-crew equipment.
Thank you everyone for such WONDERFUL models!!!

6117